Mercury Threadlocks

MTL222 PURPLE (Lite) thread locker
MTL242 BLUE thread locker thread locker
ML271 RED thread locker thread locker
MRT09 GREEN retaining compound thread locker
AVAILABLE SIZES: 1ml Pipette, This product comes in a 4 pack assortment.

MLT222 Purple
DESCRIPTION: Mercury MLT222 Purple Lite Thread locker is a general purpose, medium-high strength, thixotropic anaerobic thread locker. The product cures when confined in the absence of air on close-fitting metal surfaces.

APPLICATIONS: MLT222 is formulated to lock all metric and imperial nuts and bolts, preventing vibration loosening and leakage through the threads. MLT222 is slightly oil tolerant, so it will bond some as received parts, but best results are obtained with clean substrates. The thixotropic nature of the product prevents run off, dripping and migration after assembly. MLT222 is typically used on mounting bolts, housing screws, etc. MLT222 prevents corrosion of assembly parts.

USEFUL HINTS/NOTES: The higher viscosity material can create a thick film when bonding uneven surfaces or large gaps.


MLT242 Blue
DESCRIPTION: Mercury MLT242 Thread locker is a general purpose, medium-high strength, thixotropic anaerobic thread locker. The product cures when confined in the absence of air on close-fitting metal surfaces.

APPLICATIONS: MLT242 is formulated to lock all metric and imperial nuts and bolts, preventing vibration loosening and leakage through the threads. MLT242 is slightly oil tolerant, so it will bond some as received parts, but best results are obtained with clean substrates. The thixotropic nature of the product prevents run off, dripping and migration after assembly. MLT242 is typically used on mounting bolts, housing screws, etc. MLT242 prevents corrosion of assembly parts.

USEFUL HINTS/NOTES: The higher viscosity material can create a thick film when bonding uneven surfaces or large gaps.


ML271 Red
DESCRIPTION: Mercury MLT271 Red is a single component, high strength (permanent) anaerobic thread locker. TL71 cures when confined in the absence of air between close-fitting metal surfaces.

APPLICATIONS: MLT271is formulated to lock metal fasteners thus preventing vibration loosening and leakage through the threads. MLT271 is particularly suitable for larger threaded fasteners, e.g. studs and all applications where maximum strength is needed. MLT271 prevents corrosion of assembly parts.

USEFUL HINTS/NOTES: The higher viscosity material can create a thick film when bonding uneven surfaces or large gaps. The Application of heat may be required to assist in removal of parts.


MRT09 Green retaining Compound
DESCRIPTION: Mercury MRT09 Retaining Compound is a single part, low viscosity, fast curing anaerobic resin used for bonding rigid assemblies of all types. It can also be used effectively to increase the strength of most mechanical assemblies.

APPLICATIONS: MRT09 locks keys and splines. Eliminates backlash in worn assemblies. Locks bearings in place, preventing spin-out. Bonds rotor to shafts in fractional and sub fractional horsepower motors. Locks bushings and sleeves in housings and on shafts. Augments press fits. Restores the fit to worn assemblies or out-of-tolerance parts.
vUSEFUL HINTS/NOTE: This lower viscosity product is recommended for interference or close fitting parts where large gap filling is not required.