Hobbico Accu-cycle Elite TX/RX Battery Cycler

This is the Hobbico AC/DC Accu-Cycle Elite Battery Cycler.
Charges, Discharges and Cycles NiCd, NiMH and Lithium-based battery packs.
Perfect for radio batteries, Lithium Park Flyer batteries, plus single cell glow starter cells.

*** 2 Year Warranty ***

FEATURES:
Charges and Discharges 1-3 cell Lithium-Ion and Lithium Polymer packs For LiPo packs that are wired for balancing a LiPo Cell Balancer such as Great Planes' ElectriFly Equinox (GPMM3160) is compatible with the Accu Cycle Elite

Peak Charges, Discharges and Cycles 1-10 cell NiCd or NiMH packs

Charges two batteries at once

Auto Smart Set automatically calculates safety time-out, Charge Rate, TRICKLE Rate and Discharge Voltage cut-off based on battery type, capacity, and voltage

Custom Charging and Discharging routines can be created for up to 10 packs and stored in memory

Prevents overcharging with Peak Detection for NiCd and NiMH packs and CC/CV detection for Lithium-based packs

On-screen messages appear on large easy to see two line 16-character LCD screen, messages feature less abbreviations, better explanations and units of measurement with every number

AC/DC compatible for at home or on the field recharging

Optional Temperature Sensor (HCAP0281) functions w/ all battery types
Two Temperature Sensor ports
Two year warranty

INCLUDES:
One Accu-Cycle Elite cycler
One AC adapter/power supply (NOT AVAILABLE SEPARATELY)
Two (Red & Black) alligator clips w/banana jacks
One instruction booklet
One Main/Memory menu sheet
One NiCd, NiMH, and Lithium menu sheet
One Charge/Discharge chart w/blank memory chart

REQUIRES:
If needed, a 12V DC source, such as HCAP0800 & HCAP0200
If temperature sensor is needed, use HCAP0281

Connectors to go from the charger to the battery or radio:
HCAP0101....FUTABA J Tx/Rx LEADS ALL RADIOS EXCEPT 9VAP
HCAP0102....FUTABA J Tx/Rx LEADS 9VAP ONLY
HCAP0105....JR Tx/Rx LEADS
HCAP0106....HITEC Tx/Rx LEADS
HCAP0108....CHARGE LEADS, BANANA PLUGS TO ALLIGATOR CLIPS
HCAP0110....Tx BATTERY WITH 9V CONNECTOR, FUTABA J Rx CHARGE LEAD
HCAP0310....BANANA PLUGS ONLY (3 PAIR)

SPECS:
Input Voltage: 11-14.5V DC
AC Power Supply: 110V AC 60Hz input, 14.5V DC 2.5A output
Number of Output Ports: two

For BOTH Outputs:
Battery Types: Nickel-Cadmium (NiCd), Nickel-Metal Hydride (NiMH)
Lithium Polymer (LiPo), Lithium-Ion (Li-Ion)

Number Cells:
1-10 NiCd or NiMH (1.2-12V)
1-3 LiPo or Li-Ion (3.6-11.1V)

Fast Charge Current: * 50-2000mA

Fast Charge Termination:
NiCd/MH -"negative deltaV'" Peak Detection,
LiPo -"Constant-Current/Constant-Voltage" (4.2V/cell max.)
Li-Ion -"Constant-Current/Constant-Voltage" (4.lV/cell max.)

Peak Detection Sensitivity: 3-15mV per cell adjustable
Fast Chg Safety Timer: * automatically calculated
TRICKLE Charge Current: * 0-200mA
Peak Detection Delay: 3 minutes
Discharge Current: 50-2000mA

Discharge Cutoff Voltage:
* 0.8-1.2V per cell adjustable for NiCd & NiMH
3.7V per cell fixed for Li-Ion and LiPo

Cycle Count: 1 to 5 (NiCd and NiMH only)
Cycle Delay- Chg/Dsch: 10 minutes
Status Indicators: two tri -color LEDs (Red/Amber/Green)
Optional Temp. Cutoff: ** 60-130F (15-54C)
Output Connectors: banana jacks
Battery Memories: ten
Display Type: 2-line, 16 character LCD
Case Size: 3.7 x 6.1 x 1.2 in (94 x 30.5 x 155mm)
Weight: 13.23oz (375g, not including Power Supply)
Length: 6.1" (155mm)
Width: 3.7" (94mm)
Height: 1.2" (30.5mm)

* Auto Smart Set Feature, can be manually overridden except for Fast Charge safety timer

** Requires optional Temperature Sensor -HCAP0281

COMMENTS:
To achieve Elite's maximum potential when using a DC input the power source must be capable of delivering at least 5A of current while maintaining 12V DC