ElectriFly TritonEQ AC/DC Battery Charger

This is the ElectriFly AC/DC TritonEQ charger, discharger, and cycler with built-in equalizer.

Primary differences between the TritonEQ and the Triton2 EQ are:

TritonEQ:
- Handles 1-14 NiCd & NiMH cells, 1-6 LiPo/LiIon, 1-6 (2-12V)Pb
- Fast Charge Current: 0.1-5.0A 63W max DC, 50W max AC
- Battery Memories: 1
- Cycle Count (NiCd, NiMH only): 1-5 cycles
- No thermal probe port

Triton2EQ:
- Handles 1-24 NiCd & NiMH cells, 1-6 LiPo/LiIon, 3-12 (6-24V)Pb
- Fast Charge Current: 0.1-8.0A Linear 120W max DC, 100W max AC
- Battery Memories: 10
- Cycle Count (NiCd, NiMH only): 1-10 cycles
- Thermal probe port

Upgraded features over the ElectriFly Triton Jr. include:
- Lightweight built-in switching AC power supply, plus DC input capabilities
- New reversed character LCD with backlight and 0-45 adjustable view angle
- Built-in balancing for 1-6S LiPo, Li-Ion or LiFe (A123) cells with FlightPower and ElectriFly adapters

Features:
- Charges: 1-14 cell NiMH and NiCd cells; 1-6 cell LiPo, Li-Ion and LiFe (3.6, 3.7 or 3.3V cells)
- Peak detection technology for NiCd and NiMH batteries, and constant current/constant voltage technology for lithiums and lead-acid batteries
- Ideal for radio batteries and with charge currents adjustable from 100mA to 5 amps (limited to 1C for lithiums)
- Can also handle large power packs
- Built-in balancing for up to 6S LiPo, Li-Ion or LiFe (A123) cells with FlightPower and ElectriFly adapters (GPMM3200 and GPMM3201)
- Discharge cutoff voltage can be adjusted for NiCd/MH
- Discharge cutoff voltage is fixed for lithiums and lead-acid batteries
- NiCd and NiMH trickle current is automatically set at 1/20th of the fast charge current setting
- Reversed LCD with backlight plus a 0-45 adjustable view angle clearly displays input and output volts, peak volts, individual lithium cell voltages, average discharge volts, charge and discharge capacity, currents and time, error messages and more
- Touchpad controls and super-simple programming make for simplicity and reliability
- Safety features include fast charge safety timer, current overload and reverse polarity protection
- One year limited warranty

Includes:
- ElectriFly AC/DC TritonEQ with FlightPower
- ElectriFly adapters
- AC power cord
- DC power cord with alligator clips
- Instruction manual

Requires:
- Matching connector for discharge lead depending on battery;
- HCAP0101 Futaba J Tx/Rx Charge Leads NO 9VAP
- HCAP0102 Futaba J Tx/Rx Charge Leads 9VAP ONLY
- HCAP0105 JR Tx/Rx Charge Leads
- HCAP0106 Hitec/Airtronics Z Tx/Rx Charge Leads
- GPMM3148 Charge Lead BANANA/DEANS MALE U
- GPMM3149 Charge Lead BANANA/DEANS MICRO
- DTXC2222 Charge Lead Banana Plugs To Traxxas Male
- A more complete list of connectors can be found in the Accessory Completion Guide

Specs:
- AC Input Voltage: 110V 60Hz - 240V 50Hz (detachable AC cord)
- DC Input: 11-15.0V DC, with large alligator clips,br /> - Number of Outputs: One, banana jack
- Battery Types, number of cells: 1-14 NiCd, NiMH, 1-6 LiPo, Li-Ion, or LiFe (3.6, 3.7 or 3.3V cells), 2, 4, 6, 8, 10, 12V Pb (2V per cell)
- Fast Charge Current: 0.1-5.0A (1C maximum for lithiums) 63W max DC, 50W max AC
- Fast Charge Termination: Peak detection NiCd, NiMH, cc/cv for Pb and lithiums
- Trickle Current (NiCd/MH only): Chg current / 20
- Peak Sensitivity (NiCd/MH only): 8mV NiCd, 5mV NiMH
- Peak Delay at Start (NiCd/MH only): 3 minutes
- Fast Charge Safety Timer: NiCd/MH 1.5 hours, lithiums 3 hours, or turn off
- Lithium Balancing Accuracy: 5mV per cell
- Lithium Balancing Connector: FlightPower and ElectriFly adapters included
- Lithium Max. Node Current: 300mA
- Discharge Current: 0.1-1.0A (5W max)
- Discharge Cutoff Voltage: NiCd, NiMH 0.1-16.8V, LiPo, Li-Ion 3.0V per cell, LiFe 2.5V per cell, Pb 1.8V per cell
- Cycle Count (NiCd, NiMH only): 1-5 cycles
- Battery Memories: One
- Programming Controls: Membrane touchpad, 4 buttons
- Display Type: 2x16 reversed LCD w/backlight and adjustable angle
- Audible Indicators: Beeper
- Case Material: Aluminum and ABS plastic
- Safety Devices: Solid-state reverse polarity and overload
- Case Size: 5.9 x 6.0 x 2.3 in (150 x 153 x 58mm)
- Weight: 23.8oz (675g) without AC power cord