|
RTR Sprint 2 w/HPI Racing Impreza Pntd/200mm
|
FEATURES: Chassis: Reinforced molded nylon chassis, upper deck and shock towers
Drive: Four wheel
Drive Type: Urethane belt
Motor: Tornado 17 turn
Radio: HPI (made by Airtronics) AM TX-2 pistol grip with steering and
throttle trim, dual rate adjustment, charge jack and servo reverse,
standard size servo
Electronic Speed Control: Hawk Power Reverse
Full ball bearings: Located in transmission and bell crank, rubber
sealed bearings in wheels, 14 total
Shocks: Four oil-filled, plastic bodied
Differentials: Planetary gear type with metal outdrives, sealed
Transmission: Ball bearing equipped and capable of handling modified
motors down to 10 turns
Wheels: 6 spoke chrome 1" (26mm) wide, 2" (51mm) diameter, 6mm offset
at rear, 3mm offset at front
Tires: X-pattern D compound 1" (26mm) wide 2.5" (64mm) outer diameter
Bumpers: Front, foam
Body: Fully trimmed and painted with rear wing and decals applied
Battery: 1800mAh 7.2V 6-cell with standard connector, chassis also
accepts saddle pack batteries
Charger: AC wall, charges battery in six hours
Suspension: Fully adjustable
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Ackerman: Adjustable, Ackerman describes the effect of the inside
front wheel turning tighter than the outside front wheel
Steering: Bell-crank type with servo saver
INCLUDES: HPI Sprint 2 on-road Touring Car with oil-filled shocks, 17 turn
motor, Electronic Speed Control, painted body, tires, foam inserts
wheels, 28 tooth pinion gear, 87 tooth spur gear, instructions, 2-
channel radio, 1800mAh battery pack, AC wall charger, 2 and 3° rear
toe-in blocks, 4 and 6° front caster blocks, Sprint 2 decal sheet
REQUIRES: AA batteries: 8 for transmitter
Misc. Items: Building and track equipment
SPECS: VEHICLE-
Length: 17" (431mm)
Width: 7.5" (190mm)
Height: 5" (127mm)
Weight: 3.1lbs (1425g) ready-to-run
Wheelbase: 10" (254mm)
Front Tread: 6.5" (166mm)
Rear Tread: 6.9" (175mm) side-to-side at wheel centers
Front Track: 7.3" (186mm)
Rear Track: 7.75" (197mm)
Ground Clearance: 0.41" (10.5mm)
Gear Ratio: 6.62:1
Tires- Front and Rear: 1" x 2.5" (26mm x 64mm)
BODY-
Length: 17" (432mm)
Width: 8.2" (208mm) at rear wheels (widest point)
7.25" (184mm) ahead of front wheels (thinnest point)
Height: 3.5" (89mm)
|
Price: $254.99
Buy Product Online | Visit Store Home
|
|
|
Manufactured by HPI |
|
|
|
|
Other Items from Ready-To-Run
HPI Sprint RTR w/Porsche 911 Turbo Body - ELECTRIC 1/10 RTR TOURING CAR FROM HPI. THE PACKAGE INCLUDES RADIO, ELECTRONIC SPEED CONTROL, 20 TURN MOTOR, 7.2V RECHARGEABLE BATTERY PACK, WALL CHARGER, AND PRE-PAINTED AND TRIMMED BODY.
HPI Sprint RTR w/Mercedes CLK Body - THIS IS AN ELECTRIC 1/10 RTR TOURING CAR FROM HPI. THE PACKAGE INCLUDES RADIO, ELECTRONIC SPEED CONTROL, 20 TURN MOTOR, 7.2V RECHARGEABLE BATTERY PACK, WALL CHARGER, AND PRE-PAINTED AND TRIMMED BODY
Associated TC4 4WD Touring RTR - THIS IS THE ASSOCIATED 1/10TH SCALE TC4 RTR ON ROAD SEDAN TOURING CAR. INCLUDES: 4-WHEEL SHAFT DRIVE, 3MM COMPOSITE CHASSIS, ADJUSTABLE CAMBER AND STEERING, FULL BALL BEARINGS, CARBIDE BALL STEALTH DIFFS
RTR Sprint 2 w/HPI Racing Impreza Pntd/200mm - 1/10 scale electric powered, radio controlled, Ready To Run HPI Sprint 2 on-road Touring Car with the Impreza Body
|
|
Return To Al's Hobby Shop
|
|
|
 |
| E-commerce powered by MonsterCommerce shopping cart. |
|